The Dedolight DLED4/Felloni 2x2 Daylight 4-Light Basic Kit offers a lighting solution with two DLED4 focusable LED lights and two Felloni LED light panels along with a DP1.1 imager, two Felloni softboxes, two mains power supplies, and a soft case. This combination features excellent color reproduction with the DLED4 and Felloni lights due to CRIs of >91 and 84 respectively. The DLED4 excels due to the ability to focus its beam from 60 to 4°, working in complement to the 50° output of the Felloni. They are both capable of producing a high output and their unique features provides you with a versatile setup.
Having paved the way with the on-camera Ledzilla LED and the 1x1' stand-mounted Felloni Dedolight continues to forge ahead with the introduction of the Mobile DLED4.1-D LED Light Head (Daylight). Again using aspheric lens elements results in an amazing 1:20 flood to spot ratio with a beam angle of 60 - 4 degrees that delivers 27,000 Lux in spot mode @ 3.0' with no UV radiation emitted. A wide angle attachment increases coverage 85 - 54 degrees.
The 5,600K daylight balance blends in seamlessly in outdoor situations and is ideal for location and ENG work, and as is characteristic of LED sources, generates negligible heat. The DLED4.1-D is powered by the 100 to 260VAC DT4.0-1 or DT4.0-1-DMX which offers remote control of the light's 100 - 20% dimmable light intensity. A DC power supply is also available for battery power sources up 18V. A full line of accessories from scrims and filters to Dedolight Imager projection attachments is available.
Note: Requires purchase of power supply
LED light sources for image makers have been around for quite some time now, with everyone throwing their hat in the ring regarding on-camera versions and a few big players producing large free-standing panels. When uber-tech innovator, Academy Award winner Dedolight weighs in with a new panel, however, it tends to cause a stir.
It's called the Felloni and was reportedly named by Dedolight founder Dedo Weigert, himself. Is it a play on Fellini, substituting the "o" from Dido? Opinions vary but what doesn't is the buzz that this is an extraordinary light. Or should we say 30 lights? The lights are produced in 3 general categories, Standard (324 LEDs), High Output (576 LEDs) and Low Profile (324 LEDs). Within each of these categories are tungsten, daylight and bicolor iterations and within these sub-categories are 15°, 30° and 50° units. What they all have in common are claims of higher output with lower power consumption than competitors, a CRI of 84 and V-Mount, and D-Tap battery interfaces. All versions come with a multi-voltage AC power supply, diffuser, metal filter holder strips and an 8' cable to dismount the on-board dimmer and turn it into a wired remote.
This Dedolight Felloni Tecpro 50° High Output Daylight LED Light runs on 576 LEDs and has a flood beam angle which gives lots of coverage at close range. Nearly doubling the amount of LEDs enables the Felloni to produce nearly double the output as compared to the Standard Version. If you need a broad even light to establish a base light level on set, or require a fill light or light for a large subject, the Felloni Techpro 50° High Output; is for you. The 1 x 1', 4.4 lb panel is virtually heat-free, so you can squeeze it into places where other lights just can't go without worrying about harming the talent. It's also rainproof and upgradable with the purchase of an LCD dimmer or DMX module. A wireless DMX module is in the works.
Dedicated to Dedolight Felloni LED panels, this Softbox helps to soften and smooth the output for a more flattering light quality. It features a foldable design for easy storage and travel, and a removable front diffuser is included along with two removable side flags, which effectively serve as barndoors to control the beam spread.
Used as a focusing snoot, the Dedolight Projection Attachment creates an area of light with either a soft or hard edge. It is supplied with an 85mm f/2.8 lens. An adjustable 18-leaf iris diaphragm, 60, 150 and 185mm lenses are also available separately.
This Dedolight DT4 Power Supply (90-260 VAC) is a small, lightweight power source for the DLED4 tungsten and daylight balanced heads. The self-seeking voltage unit can be used virtually anywhere there's electricity and provides stable power that's dimmable from 100 - 20%. The DT4 comes with an 8.2' mains cable.
- 2 x DLED4-D Dedolight focusing LED light head daylight
- 2 x DT4 power supply for DLED4 monocolor light heads
- 2 x DPLS light shield ring
- 2 x DBD8 Standard barn door (eight leaves)
- 1 x DP1.1 imager projection attachment
- 1 x DPGH steel gobo holder (size M)
- 1 x DPGSET Gobo Set (six popular steel gobos, size M)
- 1 x DPACP Accessory Pouch
- 2 x TP-COL-D50HO Felloni Dedocolor LED panel High Output 50°
- 2 x Felloni Diffuser
- 2 x Felloni power cables
- 2 x Felloni AC Adapter
- 2 x Felloni remote dimmer cables
- 2 x TP-LONI-SBX42 Felloni Soft box with 2 barn-doors
- 2 x TP-OFFSET Offset Arm for Felloni LED panel
- 2 x TP-LONI-SBXGRID40 Felloni Textile Grid for soft box 40°
- 1 x DSCLED2x2 Soft case for 2 x Felloni / 2 x DLED 4
- 1 x SDST4 Extra stand kit with 4 x DST and soft bag